The iClebo vacuums works best on all flat surfaces and non shaggy carpets.
The iClebo vacuums are fairly low noise devices ranging from 58 dB[A] to 68.5 dB[A] and 70 dB[A] in the turbo mode depending on your model.
The iClebo vacuums automatically recharge themselves when the battery gets low after approximately 2 hours of run time. It typically takes the vacuums 110 minutes to fully charge. The iClebo Omega vacuum take 180 minutes to charge and offers 80 minutes of run time due to its advanced strength and suction.
No, due to the detection sensors and spring action bumpers, iClebo vacuums are designed to prevent damage to furniture or walls.
The iClebo vacuums are excellent for picking up pet hair and are mostly desired by consumers for this reason.
When the dustbin is visibly full, shown through the clear container, you may empty the debri and particles. Once the dustbin gets full an error code will display on the touch screen panel.
The mopping feature is activated by manually submerging the mop pad into a liquid solution and attaching it to the mop plate positioned under the robot. The mopping icon will indicate when the device is in mop mode.
Two well stitched microfiber mop pads come included with the robot vacuum.
The mop pads are machine washable.
Yes, the docking station calls the robot back to its base automatically when the battery is low and later resumes cleaning once it recharges.
Yes, the iClebo vacumms have a remote to enhance their capabilities of operation.
iClebo vacuums come with a 1 year manufacture service warranty of any malfunctions excluding liquid damages and physical abuse. You can find more information on the warranty below the FAQ.
The turbo mode is used to maximize the suction and the max mode is a combination of cleaning modes used for extended and thorough cleaning.
The robot allows you to schedule a set day, time and mode for scheduled cleaning without your assistance, depending on your model.
No, the iClebo robot vacuum has positioning detection sensors prohibiting it from going over any steep edges.
The boundary strip is used for blocking off an area by placing it in front of the entrance or doorway.
Yes, there is no need to disconnect or turn off the power switch if the robot is not in use.
Yes, all accessories can be reordered for your needs.
The camera maps the full dimensions of a room to assure a throrough and complete cleaning.
The cleaning brush is located in the upper top cover of the docking station.
When the blue section of the filter is worn and no longer visible it is recommended to change the filter.
Yes, you can use the cleaning brush to clean and reuse your filter if needed.